Comparison table of millimeter, mesh and micrometer | |||
mesh | μm | mesh | μm |
2 | 8000 | 100 | 150 |
3 | 6700 | 115 | 125 |
4 | 4750 | 120 | 120 |
5 | 4000 | 125 | 115 |
6 | 3350 | 130 | 113 |
7 | 2800 | 140 | 109 |
8 | 2360 | 150 | 106 |
10 | 1700 | 160 | 96 |
12 | 1400 | 170 | 90 |
14 | 1180 | 175 | 86 |
16 | 1000 | 180 | 80 |
18 | 880 | 200 | 75 |
20 | 830 | 230 | 62 |
24 | 700 | 240 | 61 |
28 | 600 | 250 | 58 |
30 | 550 | 270 | 53 |
32 | 500 | 300 | 48 |
35 | 425 | 325 | 45 |
40 | 380 | 400 | 38 |
42 | 355 | 500 | 25 |
45 | 325 | 600 | 23 |
48 | 300 | 800 | 18 |
50 | 270 | 1000 | 13 |
60 | 250 | 1340 | 10 |
65 | 230 | 2000 | 6.5 |
70 | 212 | 5000 | 2.6 |
80 | 180 | 8000 | 1.6 |
90 | 160 | 10000 | 1.3 |
The number of meshes is the number of holes, which is the number of holes per square inch.
two. Comparison table of millimeter and mesh
Φ200*50mm, mesh size: 4.75mm, standard mesh: 4 mesh
Φ200*50mm, mesh size: 4.00mm, standard mesh: 5 mesh
Φ200*50mm, mesh size: 3.35mm, standard mesh: 6 mesh
Φ200*50mm, mesh size: 2.80mm, standard mesh: 7 mesh
Φ200*50mm, mesh size: 2.36mm, standard mesh: 8 mesh
Φ200*50mm, mesh size: 2.00mm, standard mesh: 10 mesh
Φ200*50mm, mesh size: 1.70mm, standard mesh: 12 mesh
Φ200*50mm, mesh size: 1.40mm, standard mesh: 14 mesh
Φ200*50mm, mesh size: 1.18mm, standard mesh: 16 mesh
Φ200*50mm, mesh size: 1.00mm, standard mesh: 18 mesh
Φ200*50mm, mesh size: 0.850mm, standard mesh: 20 mesh
Φ200*50mm, mesh size: 0.710mm, standard mesh: 25 mesh
Φ200*50mm, mesh size: 0.600mm, standard mesh number: 30 mesh
Φ200*50mm, mesh size: 0.500mm, standard mesh: 35 mesh
Φ200*50mm, mesh size: 0.425mm, standard mesh: 40 mesh
Φ200*50mm, mesh size: 0.355mm, standard mesh: 45 mesh
Φ200*50mm, mesh size: 0.300mm, standard mesh: 50 mesh
Φ200*50mm, mesh size: 0.250mm, standard mesh: 60 mesh
Φ200*50mm, mesh size: 0.212mm, standard mesh: 70 mesh
Φ200*50mm, mesh size: 0.180mm, standard mesh: 80 mesh
Φ200*50mm, mesh size: 0.150mm, standard mesh: 100 mesh
Φ200*50mm, mesh size: 0.125mm, standard mesh: 120 mesh
Φ200*50mm, mesh size: 0.106mm, standard mesh: 140 mesh
Φ200*50mm, mesh size: 0.090mm, standard mesh: 170 mesh
Φ200*50mm, mesh size: 0.0750mm, standard mesh: 200 mesh
Φ200*50mm, mesh size: 0.0630mm, standard mesh: 230 mesh
Φ200*50mm, mesh size: 0.0530mm, standard mesh: 270 mesh
Φ200*50mm, mesh size: 0.0450mm, standard mesh: 325 mesh
Note: The definition of particle size:
(For simple definition, see overview) The larger the mesh number, the finer the material particle size; the smaller the mesh number, the larger the material particle size. The sieving particle size is the size of the sieve openings through which the particles can pass through the sieve, expressed as the number of sieve openings in a 1 inch (25.4mm) wide sieve, so it is called the mesh number.
The specifications of standard sieves in different countries are not the same. The commonly used Taylor system uses the number of holes per inch as the sieve number, which is called mesh. For example, a 100 mesh sieve means that there are 100 sieve holes per inch of the screen.